dlpt – Damogran Labs Python Tools
This is just a quick shoutout of our first official Python package on PyPi: dlpt – Damogran Labs Python Tools, which was just released! This library should cover the most…
Tag: python
Points and Vectors
I occasionaly write scripts for geometry optimization, therefore I have to wrestle with geometry. Graphically very easy problems become Ye Royale Paine In Ye Buttocks to solve analytically. At first…
VS Code STM32 IDE + Keil project
Problem Few years ago I started with Keil + STM32 dev boards. Than STM32CubeMX was released and I started using it, generating Keil project as output. This was good enough for…
Visual Studio Code STM32 IDE
This is a story about how I transformed Visual Studio Code to an IDE for embedded projects, that can work with STM32 CubeMX generated Makefile, OpenOCD and all the goodies…
Python: Variable Type Specifier
variable: variableType = … The Problem I’ve recently switched job and I was “thrown” into a large project(s) based on Python. I had to implement only a few simple functions,…
OpenFOAM meshing: a few shortcuts
Merging Files If you’re using SALOME to create STL files for meshing you can only save separate surfaces to separate files. That’s not a problem if you’re using snappyHexMesh but…
RC Filter Frequency Pole Calculator
There are numerous RC filter pole calculators online and I happily used them for a quick calculations while DIYing. The problem is that these online calculators calculate frequency pole where gain…
DIY Constrained Path Optimization
The Problem: Path optimization The exact origin of this problem is somewhat blurry but since I already have the solution I won’t put much effort into clarifying it. We have…
Points and Vectors
I occasionaly write scripts for geometry optimization, therefore I have to wrestle with geometry. Graphically very easy problems become Ye Royale Paine In Ye Buttocks to solve analytically. At first…
VS Code STM32 IDE + Keil project
Problem Few years ago I started with Keil + STM32 dev boards. Than STM32CubeMX was released and I started using it, generating Keil project as output. This was good enough for…
Visual Studio Code STM32 IDE
This is a story about how I transformed Visual Studio Code to an IDE for embedded projects, that can work with STM32 CubeMX generated Makefile, OpenOCD and all the goodies…
Python: Variable Type Specifier
variable: variableType = … The Problem I’ve recently switched job and I was “thrown” into a large project(s) based on Python. I had to implement only a few simple functions,…
OpenFOAM meshing: a few shortcuts
Merging Files If you’re using SALOME to create STL files for meshing you can only save separate surfaces to separate files. That’s not a problem if you’re using snappyHexMesh but…
RC Filter Frequency Pole Calculator
There are numerous RC filter pole calculators online and I happily used them for a quick calculations while DIYing. The problem is that these online calculators calculate frequency pole where gain…
DIY Constrained Path Optimization
The Problem: Path optimization The exact origin of this problem is somewhat blurry but since I already have the solution I won’t put much effort into clarifying it. We have…